Digital Sound Field Parameter Descriptions - Yamaha RX-V1300RDS Bedienungsanleitung

DIGITAL SOUND FIELD PARAMETER DESCRIPTIONS

You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your
listening room. Not all of the following parameters are found in every program.
I DSP LEVEL
Function: This parameter adjusts the level of all the DSP effect sounds within a narrow range.
Description: Depending on the acoustics of you listening room, you may want to increase or decrease the DSP effect
level relative to the direct sound.
I INIT. DLY (Initial Delay)
[P. INT. DLY for the presence sound field]
Function: This parameter changes the apparent distance from the source sound by adjusting the delay between the
direct sound and the first reflection heard by the listener.
Description: The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther
the apparent distance seems. For a small room, this parameter would be set to a small value, and for a
large room, it would be set to a large value.
I ROOM SIZE
[P. ROOM SIZE for the presence sound field]
Function: This parameter adjusts the apparent size of the surround sound field. The larger the value, the larger the
surround sound field becomes.
Description: As the sound is repeatedly reflected around a room, the larger the hall is, the longer the time between
the original reflected sound and the subsequent reflections. By controlling the time between the
reflected sounds, you can change the apparent size of the virtual venue. Changing this parameter from
one to two, doubles the apparent length of the room.
Sound Source
0110V1300_69-74_EN-GB.p65
Source Sound
Time
INIT.DLY INIT.DLY
Sound Source
Reflection Face
Small value = 1 ms
Source Sound
Time
Small value = 0.1
71
Control Range –6 dB – +3 dB
Control Range 1 – 99 msec
Early
Reflections
Time
INIT.DLY
Large value = 99 ms
Control Range 0.1 – 2.0
Early
Reflections
Time Time
Large value = 2.0
2002.11.07, 12:09
Time
71