Operation And Maintenance; Up And Down Buttons; Stop Function; Favourite Position (My) - SOMFY Sonesse 40 io Anleitung

Sonesse 40 io

3. OPERATION AND MAINTENANCE

͉
͉
This drive does not require any maintenance operations.

3.1. UP AND DOWN BUTTONS

Briefly pressing the Up or Down button causes the motorised product to
rise or lower fully.

3.2. STOP FUNCTION

The motorised product is moving.
Briefly press my: the motorised product stops automatically.
-

3.3. FAVOURITE POSITION (MY)

An intermediate position, which is called the "favourite (my) position"
and is different from the upper and lower positions, can be programmed.
3.3.1. Programming or modifying the favourite position
(my)
1) Place the motorised product in the desired favourite position (my).
2) Press the my button for ≈ 5 s until the motorised product moves up
and down: the desired favourite position (my) has been programmed.
3.3.2. Using the favourite position (my)
Briefly press my: the motorised product starts to move, and stops in
the favourite position (my).
3.3.3. Deleting the favourite position (my)
1) Press my: the motorised product starts to move, and stops in the
favourite position (my).
2) Press my again until the motorised product moves up and down: the
favourite position (my) is deleted.

3.4. OPERATING TIPS AND ADVICE

3.4.1. Questions about the Sonesse 40 io?
Observations
The motorised product does
not operate.
If the motorised product still does not work, contact a drive and home automation professional.
Copyright 2018 SOMFY ACTIVITES SA, Société Anonyme. All rights reserved.
©
Possible causes
The control point battery is low.
The drive is in thermal protection mode.
a
=
b
=
a
=
b
=
1)
2)
1)
2)
Solutions
Check whether the battery is low and replace it
if necessary.
Wait for the drive to cool down.
EN
a
=
b
=
a
=
b
=
15