Connections - Yamaha cdx 396 Bedienungsanleitung

● Before making any connection, switch OFF the power to
the unit and the amplifier or other component.
● Connections should be made to the correct input
terminals of the amplifier or another component.
LINE OUT
1
RCA pin cable
(included)
The shaded part ( ) is provided for CDX-596 only.
To connect this unit to your amplifier, choose one of the ways listed below.
When the LINE OUT (analog) terminals of
1
this unit are used (
Connect these terminals to the "CD" (or "AUX") terminals of
the amplifier. For additional details concerning these
connections, refer to the operation instructions of the
amplifier being used.
* Be sure that the left ("L") and right ("R") of these terminals are
connected to the corresponding (left and right) terminals of the
amplifier or another component.
CDX-596 and CDX-496 only
● The level of signals output from any of these terminals
into an amplifier can be adjusted by using the
– OUTPUT LEVEL + buttons.
● When using the DIGITAL AUDIO OUT (OPTICAL or
COAXIAL) terminal, set the level of signals output into
an amplifier to max. by using the – OUTPUT LEVEL +
buttons.

CONNECTIONS

DIGITAL AUDIO OUT
1
OPTICAL COAXIAL
2
Optical fiber cable
(not included)
OPTICAL
CD DIGITAL IN
)
● If the placement of this unit causes noise to another
equipment, such as a tuner, separate them from each
other.
3
Connection cable
(For CDX-596 only; not included)
COAXIAL
When the DIGITAL AUDIO OUT (OPTICAL)
terminal of this unit is used (
● Before using this terminal, pull out the terminal's cover.
● Make the connection from this terminal to the optical
input terminal of an amplifier by using a commercially
available optical fiber cable.
* Use an optical fiber cable that conforms to EIAJ
standards. Other cables might not function correctly.
● Be sure to attach the terminal's cover when this terminal
is not being used, in order to protect the terminal from
dust.
● This terminal can also be connected to the optical input
terminal of an MD recorder etc. to record CD onto MD
directly.
When the DIGITAL AUDIO OUT (COAXIAL)
terminal of this unit is used (
CDX-596 only
Make the connection from this terminal to the digital input
terminal of an amplifier by using a connection cable.
To AC outlet
Amplifier
2
)
3
)
5
E-