Eliwell ICPlus 915 Bedienungsanleitung Seite 25

PAR. DESCRIPTION
Pb1 value control setpoint SP1. The SEtpoint is visible from the machine
SP1
status menu and not from the programming menu.
Pb1 value control setpoint SP2. The SEtpoint is visible from the machine
SP2
status menu and not from the programming menu.
REGULATOR 1 (folder 'rE1')
HC1 This sets the controller 1 operating mode. H (0) = Hot; C (1) = Cold.
OS1 Value to be added to SP1 if reduced set enabled.
Operating band 1.
db1
(See 'ON/OFF regulation diagram').
Regulator 1 activation differential.
dF1 The utility stops on reaching the SP1 value (as indicated by control probe) and
restarts at a value equal to T=SP1+dF1 relative to HC1.
HS1 Maximum value assignable to setpoint SP1.
LS1 Minimum value assignable to setpoint SP1.
Pb1 maximum value alarm on regulator 1.
HA1
(See 'Max/Min temperature alarms').
Pb1 minimum value alarm on regulator 1.
LA1
(See 'Max/Min temperature alarms').
PARAMETERS TABLE
25
MODEL RANGE VALUE M.U. LEVEL
NTC/PTC
Pt100-Tc LS1...HS1
V/I
NTC/PTC
Pt100-Tc LS2...HS2
V/I
ALL H/C
NTC/PTC
-30.0...30.0
Pt100-Tc -30.0...30.0
V/I -30...30
NTC/PTC
0.0...30.0
Pt100-Tc 0.0...30.0
V/I 0...30
NTC/PTC
0.0...30.0
Pt100-Tc 0.0...30.0
V/I 0...30
NTC/PTC
140.0
Pt100-Tc LS1...HdL 1350
V/I
NTC/PTC
-50.0
Pt100-Tc LdL...HS1 -199.9
V/I -199
NTC/PTC
LA1...150.0 140.0
Pt100-Tc LA1...1999 1350
V/I LA1...150
NTC/PTC
-150.0...HA1 -50.0
Pt100-Tc -328...HA1 -199.9
V/I -150...HA1 -150
0.0 °C/°F
0.0 °C/°F /
0 num
0.0 °C/°F
0.0 °C/°F /
0 num
H flag Inst
0.0 °C/°F
0.0 °C/°F Inst
0 num
1.0 °C/°F
1.0 °C/°F Inst
1 num
1.0 °C/°F
1.0 °C/°F
User/Inst
1 num
°C/°F
°C/°F User/Inst
199 num
°C/°F
°C/°F User/Inst
num
°C/°F
°C/°F User/Inst
150 num
°C/°F
°C/°F User/Inst
num