General Information - Gemü 532 SAK Originalmontageanleitung

Contents
1

General information

2 Order data
3 Components in the SAK spare
parts kit
4 Construction
5 Disassembly
5.1 Disassembly of actuator from
valve body
5.2 Disassembly of actuator top
6 Replacement of spare parts kit
SAK
6.1 Component kit
6.2 Exploded diagram
6.3 Replacement of the spare parts kit 15
7 Installation
7.1 Installation of actuator top
7.2 Actuator mounting on the
valve body
8 Disposal
532 SAK
1 General information
10
11
The equipment is subject to pressure!
® Risk of severe injury or death!
11
Only work on depressurized plant.
12
G
14
14
Corrosive chemicals!
14
® Risk of caustic burns!
G
15
15
15
Hot plant components.
16
® Risk of burns!
16
G
16
17
Do not use the valve as a step or as an
aid for climbing.
® This entails the risk of slipping-off or
damaging the valve.
Do not exceed the maximum
permissible pressure!
® Take precautionary measures to
avoid possible pressure surges (water
hammer).
Observe the GEMÜ 532
+
installation, operating and
maintenance instructions!
10 / 20
WARNING
WARNING
Wear appropriate protective
gear when installing.
CAUTION
Only work on a plant that
has cooled down.
CAUTION
CAUTION