Disposal Of Packaging; Requirements For The Set-Up Location - Silvercrest SKR 800 C3 Bedienungsanleitung Und Sicherheitshinweise

Disposal of packaging

The packaging protects the device from damage during transport. The packaging
materials have been selected for aspects of environmental friendliness and
disposal, and they are therefore recyclable.
Returning the packaging to the material cycle conserves raw materials and
reduces the amount of waste that is generated. Dispose of packaging materials
that are no longer needed in accordance with applicable local regulations.
Dispose of the packaging in an environmentally friendly manner.
Note the labelling on the packaging and separate the packaging material
components for disposal if necessary. The packaging material is labelled with
abbreviations (a) and numbers (b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
NOTE
► If possible, keep the original packaging for the complete warranty period
of the device so that the device can be packaged properly for return ship-
ment in the event of a warranty claim.

Requirements for the set-up location

For the safe and trouble-free operation of the device, the set-up location must
fulfil the following requirements:
■ When setting up the device, place it on a firm, flat and horizontal surface.
Use the fold-out adjustable foot
■ The surfaces of some items of furniture might contain components that can
corrode and soften the rubber feet of the device. If necessary, place a mat
under the device's rubber feet.
■ Set up or mount the device in such a way that the provided ventilation
openings and speakers
■ Do not operate the device in a hot, wet or extremely damp environment or
in the vicinity of flammable materials.
■ The mounting location must be selected so that the device is not exposed
to vapours. Do not install the device directly over a hotplate.
■ The mains socket must be easily accessible so that the plug can be easily
pulled out in an emergency.
■ 88 │ GB │ MT
p
.
s
are not covered.
SKR 800 C3