Operation; Menu Structure - EuroLite LED PAR-64 COB Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board or in DMX-controlled mode via any commercial DMX controller.

Menu structure

To select a function, first call the menu with the MENU button. Navigate with the UP or DOWN button so
many times until the desired function is indicated on the display. Use the ENTER button to select the
function. With the buttons UP and DOWN you can select the mode. Confirm with ENTER. If you do not do
so, the device goes back to the main functions after 20 seconds without saving your settings. If you wish to
go back to the main functions without saving your settings, press MENU.
Mode
DMX operation
Dimmer profile
Dimmer curve
Dimmer frequency
Display
Addr A001-A512
2CH
4CH
Chnd 5CH
6CH
9CH
StdA
StgE
dInd tv
ArAL
thAL
LInn
InuE
dInC
SuAr
SCur
900
1000
1100
1200
1300
1400
1500
Freq
2500
4000
5000
10k
15k
20k
25k
24/32
Function
Start address
2-channel mode
4-channel mode
5-channel mode
6-channel mode
9-channel mode
Standard (no rise & down time)
Stage (shortest rise & down time)
TV (medium rise & down time)
Architectural (long rise & down time)
Theatre (longest rise & down time)
Linear dimmer curve
Exponential dimmer curve
Inverse exponential dimmer curve
S-curve
900 Hz
1000 Hz
1100 Hz
1200 Hz
1300 Hz
1400 Hz
1500 Hz
2500 Hz
4000 Hz
5000 Hz
10000 Hz
15000 Hz
20000 Hz
25000 Hz
00125480, Version 1.1