Introduction; This Manual - mundoclima MUPIR-H9 Installations- Und Benutzerhandbuch

1. INTRODUCTION

1.1 This manual

This manual includes the necessary information about the unit. Please read this manual
carefully before you use and maintain the unit.
1.2 The unit
The swimming pool heat pump is one of the most economical systems to heat the
swimming pool efficiently. Using the free renewable energy from the air it delivers up to
five times more energy in heating than a traditional heating system such as gas boiler or
electric heater. So you will save 4/5 cost of the traditional heating. The swimming pool
heat pump lengthens your swimming season and gives you comfort at high level. You
could enjoy swimming not only in summer, but also in spring, autumn and even winter
time.
1. Ecological and economical heating
By making use of the renewable energy in the outside air, it consumes much less energy
with low carbon emission. Use environment friendly advanced refrigerant R32 which
has no effect on Ozone.
2. Titanium heat exchanger
Advanced titanium heat exchanger guarantees long life span of heat pump free from
corrosion and rust. By using of titanium heat exchanger the heat pump could be applied
with all types of water treatment such as chlorinate, iodine, bromine and salt water.
3. Multiple functions
- Cooling and heating, Auto functions available;
- Auto operation, Auto-restart, Auto defrost
- Wide ambient working condition: -7°C to 43°C
4. Reliable operation
To guarantee the stable running and increase the stability of the unit multiple protection
devices have been set into pool heat pump which includes insufficient water flow
protection, high/low pressure protection, overload protection, compressor protection.
5 . Safe use
The swimming pool heat pump works without oil, gas or other hazardous substance which
avoid potential risk that goes together. Moreover no gas connection or a fuel tank is
needed. No risk of intoxication, smell or pollution from leakage.
6. Self-diagnosis
When there is malfunction, the swimming pool heat pump will make self-diagnosis by
displaying error code from the control panel. The problem could be found out at a glance.
34