Parkside HG04966 Bedienungs- Und Sicherheitshinweise Seite 170

wall where you wish to search for
concealed objects.
4. Press and hold the PUSH button
until the signal tone hums. The appli-
ance has now adjusted itself to the
wall thickness. Continue to keep the
PUSH button
fig. B).
5. Move slowly along the wall with the
appliance. As the detecting intensity
arrows
closer to the center of the display,
you are getting closer to the con-
cealed object. When the detecting
intensity arrows
a constant signal tone is heard, mark
this position (see Fig. E + G).
6. Now repeat the procedure, but this
time approach the object from the
other side. As soon as the signal tone
sounds, mark this position (see Fig. G).
The concealed object runs between
these two positions.
7. In the case of a search for a power
line, the high voltage warning symbol
( )
19
170 GB/MT
pressed down (see
14
in the display
23
23
will also appear in addition
move
2
touch and
14