Addition Of Surface Areas - Parkside HG04966 Bedienungs- Und Sicherheitshinweise

Addition of surface
areas
1. Measure an area as described in the
section "Measuring surface areas".
2. Press the "M" button
symbol "M+"
in the display
surface area is now saved.
3. Press the MODE button
product is now ready for the second
measurement.
4. Measure the next surface area as
described in the section "Measuring
surface areas".
5. Press the + / = button
tion symbol „+"
the display
6. Press the RM button
the first measurement will be shown in
the lower row
7. Press the + / = button
Both measurements are added and
the result will be shown in the lower
row
21
8. Repeat steps 2 to 7 to add further
measurements.
will be appeared
24
. The measured
2
28
.
2
of the display
21
of the display
. Saving
7
. The
4
. The addi-
12
will appear in
. The result of
10
again.
12
.
2
GB/MT
.
2
163