Setting the alarm time
You can set two different alarm times.
1. Press and hold down the ALARM button
Note: If an alarm time has been set before, then that previ-
ously set alarm time appears in the LC display. If not, then the
display shows 0:00 or AM 12:00.
2. The hour display flashes. Press the SET / RESET button
set the desired value.
3. Press the ALARM button to confirm your settings. The minute
display flashes.
4. Press the SET / RESET button to set the desired value.
5. Press the ALARM button to confirm your settings.
6. Repeat steps 2 to 5 to set the time for Alarm 2.
Calling up the alarm times
Press ALARM button
for Alarm 1 or Alarm 2 respectively.
Press the ALARM button again to return to the default display.
once or twice to call up the set time
20
for about 3 seconds.
20
GB/MT
to
24
121