Cleaning and maintenance
54/82
5.12
Cleaning or replacing the front panel
accent lighting
–
From the front reach under the front panel and remove the effect lamps.
Replacing the lamps: see page 48.
Replace the starter: see page 50.
Makrolon tubes (if fitted): see page 49.
The assembly is the same process in reverse order.
5.13
Cleaning the filter in the base
–
Opening the bed base: see page 47.
–
Remove the filter.
–
Cleaning the filter when moist or dry.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Use water and detergent or put in a dish-washer