General Power Tool Safety Warnings; Functional Description - Makita 6904VH Betriebsanleitung

ENGLISH
(Original instructions)
1 Switch trigger
2 Reversing switch
3 Speed change lever
SPECIFICATIONS
Model
Capacities
Standard bolt ............................................................................M10 – M16
High tensile bolt ........................................................................M10 – M12
Wood screw ..............................................................................6 mm x 100 mm
Self-drilling screw .....................................................................6 mm
Square drive ................................................................................12.7 mm
–1
No load speed (min ) .................................................................High: 0 – 2,400
Impacts per minute ......................................................................High: 0 – 3,000
Max. fastening torque ..................................................................High: 196 N•m
Overall length ..............................................................................265 mm
Net weight ....................................................................................1.8 kg
Safety class .................................................................................
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Intended use
The tool is intended for fastening bolts and nuts.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.

General power tool safety warnings

WARNING Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
IMPACT WRENCH SAFETY WARNINGS
1. Hold the power tool by insulated gripping sur-
faces, when performing an operation where the
fastener may contact hidden wiring or its own
cord. Fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and
could give the operator an electric shock.
2. Wear ear protectors.
Explanation of general view
4 Socket
5 Anvil
6 O-ring
3.
4.
5.
6.
ENE036-1
7.
ENF002-2
SAVE THESE INSTRUCTIONS.
WARNING:
DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to safety rules for the subject product. MISUSE or
failure to follow the safety rules stated in this instruc-
GEA010-2
tion manual may cause serious personal injury.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function on the
tool.
Switch action (Fig. 1)
CAUTION:
• Before plugging in the tool, always check to see that
the switch trigger actuates properly and returns to the
"OFF" position when released.
GEB134-1
For 6904VH
To start the tool, simply pull the switch trigger. Tool speed
is increased by increasing pressure on the switch trigger.
Release the switch trigger to stop.
For 6905H
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
7 Pin
6904VH
Low: 0 – 2,100
Low: 0 – 2,500
Low: 147 N•m
/II
Check the impact socket carefully for wear,
cracks or damage before installation.
Hold the tool firmly.
Keep hands away from rotating parts.
Always be sure you have a firm footing.
Be sure no one is below when using the tool in
high locations.
The proper fastening torque may differ depend-
ing upon the kind or size of the bolt. Check the
torque with a torque wrench.
6905H
M12 – M20
M12 – M16
—
—
12.7 mm
2,200
—
2,600
—
294 N•m
—
275 mm
2.4 kg
/II
3