Leica M Anleitung Seite 204

SELECTINg A pROFILE
1. In the picture parameters menu (see p. 154/246) select
.
profile
• If user profiles are stored, the profile name appears in gray,
while free memory slots are green.
2. Select the required profile in the sub-menu, either one of the
saved profiles, or Default user profile.
Note:
If you change one of the settings for the profile currently in use ---
appears instead of the name of the profile you were previously using
in the initial menu list.
RENAMINg pROFILES
1. In the picture parameters menu (see p. 154/246) select
User
,
profile
2. Select
Manage profiles
3. Select
Rename profiles
• The profile name and name appear, with the number marked
as ready for editing.
4. Select the profile to be renamed by turning the setting dial (29)
or pressing up or down on the direction pad (30).
5. Confirm your setting by pressing the
(31) or by pressing right on the direction pad.
• The next position is marked as ready for setting.
6. The numbers and letters in the name are changed by turning the
setting dial or by pressing up and down on the direction pad,
while you select different positions by pressing either
– the
INFO
– or the SET
– or left / right on the direction pad.
The available characters are upper case letters from
numbers from
them in an endless loop..
7. Confirm your setting - only possible if the last position is active
- by pressing the
202
in the sub-menu, and
in the sub-menu.
SET
button,
button,
to and a space , and you can scroll through
0 9 _
SET or INFO button.
User
(20) or INFO button
to ,
A Z