CAME V6000 Installationsanleitung Seite 41

Optional functions
Setting the alarm
By default, this function is deactivated; by activating the alarm function, the operator emits a long sound
signal if the door stays open for more than 10 minutes. To activate it:
1
”
2
3
 Memorizing (function 5) must always be the last phase of programming, otherwise the settings will not be
saved.
Adjusting the waiting time before automatic the closing
By default, this function is deactivated. To activate it:
1
”
2
3
4
To change the duration of the waiting time before the automatic closing, either press + or -.
60 seconds
5
180 seconds
6
 Memorizing (function 5) must always be the last phase of programming, otherwise the settings will
not be saved.
Press P for about fi ve
seconds, 1 appears.
Press + and select 6
Press P, 0 appears
Press P for about fi ve seconds, 1 appears.
Press + and select 7.
Press P, 0 appears.
Press + and select 1. The automatic closing is active and the waiting
time is 30 seconds.
90 seconds
210 seconds
Press P to save the
procedure
4
5
120 seconds
240 seconds
Press + and select 1. The
alarm is now activated.
Press P to save the
procedure.
150
seconds