B) Laser - TOOLCRAFT TC-LDM 60 R Multi Bedienungsanleitung

• If it is no longer possible to operate the product
• Always observe the safety information and
• Contact an expert when in doubt about the
• Maintenance, modifications and repairs must
• If you have any questions which are not

b) Laser

• When operating laser equipment, always
• Laser radiation can be dangerous if the laser
• Never look into the laser beam or point it at
46
safely, stop using it and prevent unauthorised
use. Safe operation can no longer be
guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in
poor ambient conditions or
- has been subjected to any serious
transport-related stress.
operating instructions of any other devices
which are connected to the product.
operation, safety or connection of the product.
be carried out by a technician or a specialist
repair centre.
answered in these operating instructions,
contact our technical support service or other
technical personnel.
ensure that the laser beam is directed so
that no one is in the projection area and that
unintentionally reflected beams (e.g. from
reflective objects) cannot be directed into
areas where people are present.
beam or its reflection enters unprotected eyes.
Before using the product, familiarise yourself
with the statutory regulations and instructions
for operating this type of laser device.
people or animals. Laser radiation can cause
serious eye damage.