Manual Configuration - Silvercrest SWV 733 B1 Bedienungs- Und Sicherheitshinweise

SilverCrest SWV 733 B1
wireless router and wireless devices, which are to be connected to the wireless network via the
Dual-Band Range Extender. Test other locations if the Dual-Band Range Extender does not work
there. Plug the Dual-Band Range Extender only into a power socket, which is easily accessible.
It is possible to configure multiple Dual-Band Range Extenders. These should be
configured one after the other.
If your Wi-Fi router does not support WPS or the connection fails for some other reasons, you must
manually configure the Dual-Band Range Extender.

Manual configuration

There are two different ways to configure the Dual-Band Range Extender.
If you are not using the host network default settings on your computer and have
manually set an IP address, you must restore the host network settings to
Automatically obtain IP address. For further details, please consult the
documentation provided with your computer.
174 - English