System Settings; Setting The Time And Date; Setting The Time/Date Manually; Updating The Time - TechniSat DIGITRADIO 1 Bedienungsanleitung

9

System settings

All the settings described in this section apply equally to DAB+ and FM mode.
9.1

Setting the time and date

9.1.1

Setting the time/date manually

Depending on the time update setting (Section 9.1.2), you will need to set the time
and date manually.
> Press the MENU button and use the t or u buttons to select the [Time]
submenu.
> Press the OK button.
> Use the t or u buttons to select the [Set Time/Date] entry and press OK.
> The first numbers for the time flash (hours); these can be changed using the t
or u buttons.
The u button increases the value, and the t button reduces the value.
> Press the OK button to accept the setting.
50
> The next numbers for the time then flash (minutes); these can also be changed
as described above.
> After each setting, press the OK button to move on to the next setting.
> Proceed with setting the date as described above.
> Once all the settings have been carried out and the OK button has been
pressed for the last time, [Time Saved] appears in the display.

9.1.2 Updating the time

In this submenu you can specify whether the time should update automatically via
DAB+ or FM (VHF) or you want to enter it manually (Section 9.1.1).
> Press the MENU button and use the t or u buttons to select the [Time]
submenu.
> Press the OK button.
> Use the t or u buttons to select the [Time Updates] entry, then press OK.
EN
FR
IT
NL
NW
DK
PL
CZ
SK
51