Setting Up The Device - TechniSat DIGITRADIO 1 Bedienungsanleitung

4

Setting Up the Device

> Place the radio on a firm, secure, horizontal surface. Make sure the area is well
ventilated.
Caution!
> Do not place the device on soft surfaces such as carpets and blankets or near
curtains and wall hangings. The ventilation holes may be covered. This can
disrupt the necessary air circulation, potentially leading to the device catching
fire.
> Do not place the device near to sources of heat, such as radiators. Avoid direct
sunlight and very dusty environments.
> The device may not be placed in rooms with high humidity, e.g. kitchens or
saunas, as the presence of condensation can damage it. The device is intended
for use in dry environments and moderate climates and may not be exposed to
droplets or water spray.
24
> Please note that the base of the device may leave coloured marks on some
furniture surfaces under certain circumstances. Put a protective layer between
your furniture and the device.
> Keep the DIGITRADIO 1 away from devices that generate strong magnetic fields..
> Do not place heavy items on the device.
> If you take the device from a cold to a warm environment, condensation may
collect inside it. In this case, wait around an hour before using it.
> Lay the mains cable in such a way that nobody can trip over it.
> Ensure that the mains cable and adapter are always easily accessible so that
the device can be quickly disconnected from the mains supply!
> The socket should be as close to the device as possible.
> When connecting to the mains, insert the plug fully into the socket.
> Use a suitable, easily accessible mains connection and avoid using multiple
sockets!
EN
FR
IT
NL
NW
DK
PL
CZ
SK
25