Service Instructions; Setting Up The Device - TechniSat DIGITRADIO 3 Bedienungsanleitung

3.2.4 Service instructions

This product is quality-tested and provided with the legally-specified
warranty period of 24 months from the date of purchase. Please keep your
receipt as proof of purchase. In the event of warranty claims, please contact
the product dealer.
Note!
Should you experience a problem with this unit, or for queries and
information, our Technical Hotline is available:
Repairs can also be requested directly online at www.technisat.de/reparatur.
If the unit needs to be returned, please use the following address only:
The names of the companies, institutions or brands referred to are trademarks or
registered trademarks of the respective owners.

4 Setting up the device

> Place the device on a firm, secure and horizontal surface. Make sure the area
is well ventilated.
Caution!:
> Do not place the radio on soft surfaces such as carpets or blankets, or near to
curtains and wall hangings. These could obstruct the ventilation openings. The
necessary flow of air could be interrupted as a result. This could potentially
lead to fire in the device.
> Do not place the radio near to sources of heat, such as radiators. Avoid direct
sunlight and very dusty environments.
> Do not select a location for the device with a high level of humidity, e.g. a
kitchen or sauna, since condensation could damage the device. The device is
intended for use in a dry environment and in a moderate climate and must
not be exposed to dripping or splashing water.
Mon. - Fri. 8:00 am - 6:00 pm on tel.:
+49 (0) 3925 9220 1800.
TechniSat Digital GmbH
Service Centre
Nordstr. 4a
39418 Stassfurt, Germany
DE
EN
FR
NL
59