Switching The Alarm Off After It Has Gone Off; Switching Off The Alarm; System Settings; Equaliser - TechniSat DIGITRADIO 586 Bedienungsanleitung

Saving
> Press the OK button to save the alarm.
The alarm is active as soon as you have set the alarm repeat to Daily, Once,
Weekend, or Workdays. The status bar shows an alarm symbol with the
corresponding number of the active alarm.

17.2.2 Switching the alarm off after it has gone off

> Press the On/Standby button to turn off the alarm.
> Press the SNOOZE button to switch on the snooze function. By repeatedly
pressing SNOOZE you can also select the length of the pause from 5, 10, 15
or 30 minutes.
The alarm symbol appears on the display again if the alarm repeat is set to
Daily, Weekend or Workdays.

17.2.3 Switching off the alarm

> In the menu select the relevant alarm under > Repeat: Off.

18 System settings

All settings explained in this section apply equally to all sources.
Open the menu and use the  /  buttons to select >
>
[Main menu > System Settings]. Press the OK button to open the system
settings.

18.1 Equaliser

> Press the MENU button and then select [Main Menu > System Settings >
Equaliser].
Here you can carry out different equaliser settings to adapt the sound to your taste.
You can choose from:
Normal, Jazz, Rock, Soundtrack, Classic, Pop, News, and My EQ.
Use the / buttons to select the equaliser settings and press the OK
>
button to accept the setting.

18.1.1 My EQ setting

> Open the setting [System Settings > Equaliser > My EQ settings].
> Select [Bass] to increase/decrease the bass or [Treble] to increase/decrease
the treble.
DE
EN
FR
NL
71