Retrieving Displays; Switching Off The Device - TechniSat DIGITRADIO 360 CD Bedienungsanleitung

4.4.6 Retrieving displays

> By repeatedly pressing the INFO (3) button on the device (in CD/USB mode the button must be kept
depressed for a few seconds), or on the remote control the DISPLAY buttons of the respective
modes (button 33 for DAB, 35 for FM, 38 for CD/USB), you can display and scroll through the following
information:
DAB mode:
DLS: continuous text with additional information, station
Track, artist
Signal intensity
PTY - Programme type
Ensemble/multiplex (group name)
Frequency, channel
Signal error rate
Bit rate in kbps, sound format
Time
Date
CD/MP3/USB playback:
Folder, section/track number, runtime
ID3 on/off (show text information if available)
Track
Artist

4.4.7 Switching off the device

> You can use the On/Standby button on the device or on the remote control to switch the device to
standby; the time is shown. After approx. 10 seconds the display brightness dims.
28 28
USW mode:
RT radio text (if broadcast)
Station name
Frequency
Mono/Stereo
Time
Date