ELNA 683 Gebrauchsanweisung Seite 27

Movable Cutting Blade Position
To Disengage Movable Cutting
1
Blade (down)
Open front cover. Push in
movable cutting blade release
and rotate blade down until it clicks
into position.
To Engage Movable Cutting
2
Blade (up)
Open front cover. Push in
movable cutting blade release
and rotate blade up.
Upper Looper and 2 Thread Converter
When using the upper looper, the
2 thread converter must be disengaged.
When not threading the upper looper,
the 2 thread converter must be engaged
into the upper looper eye.
(Model 686 only)
1
To disengage the 2 thread converter,
lower the white handle on the converter.
2
To engage the 2 thread converter,
raise the white handle on the converter
to insert the tip into the eye of upper
looper.
26