Belkin TuneFM Bedienungsanleitung Seite 9

Stereo/Mono Selection
������� ��� ���
Transmitting music in stereo generally gives you the highest-
quality listening experience. However, you may get better FM signal
reception by changing the transmission to mono. The TuneFM
transmits in stereo mode by default. We suggest that you switch from
stereo to mono transmission only if your car stereo is NOT receiving
a clear signal from the TuneFM, or if you are listening to mono
recordings such
��� ���� ���� � ���������� ��� ���� ���� � ������������� ��� ������ �������
as audio books.
� ��� ���� ���� � ������������� ��� ������ �������
�� �� ��� ���� � ������������� ��� ������ �������
��� ������ �������
5356_F8Z125eaBLK_man.indb 9
You can access the stereo/mono transmission
menu by pressing the "1" and "3" buttons
simultaneously for two seconds. The TuneFM
then displays the current mode setting, which
is represented by "MONO" or "ST".
You can change the mode by pressing the up
or down arrows. Either arrow will change
between the two modes. The new setting
takes effect immediately.
To accept your mode selection, press one of the
memory preset buttons, or simply wait for the
iPod screen to return to the iPod Main Menu.
Stereo/Mono Selection
EN
| 09
16/1/07 9:37:02 am