Specifications - Makita BFL060F Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Battery cartridge
2-1. Battery cartridge
3-1. Switch trigger
4-1. Reversing switch lever
5-1. Light
5-2. LED indicator
7-1. Angle head
7-2. Adjusting ring

SPECIFICATIONS

Model
Hard joint
Fastening
torque
Soft joint
Square drive
-1
No load speed (min
Dimensions
Net weight
Rated voltage
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB(A)
The noise level under working may exceed 80 dB(A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Work mode: screwdriving without impact
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
7-3. Ring
7-4. Scale
7-5. Adjusting grip
7-6. Hole for Adjusting grip
7-7. Edge of Adjusting ring
7-8. Compression spring
8-1. Socket
8-2. Hole
BFL060F
1.5 - 6 N·m
1.5 - 6 N·m
9.5 mm
) 450
430 x 65 x 74 mm
(With Battery Cartridge BH9020A)
454 x 65 x 74 mm
(With Battery Cartridge BH9033A)
) : 70 dB(A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
BFL080F BFL120F
2 - 8 N·m 5 - 12 N·m
2 - 7.5 N·m 5 - 12 N·m
9.5 mm 9.5 mm
450 250
1.5 kg
D.C. 9.6 V
ENE033-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Screwdriver
Model No./ Type:
ENG901-1
BFL060F,BFL080F,BFL081F,BFL120F,BFL121F,BFL200F
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
3
8-3. Pin
9-1. Screw bit
9-2. Sleeve
10-1. Limit mark
11-1. Screwdriver
11-2. Brush holder cap
BFL081F BFL121F
2 - 8 N·m 5 - 12 N·m
2 - 7.5 N·m 5 - 11.5 N·m
9.5 mm 9.5 mm
700 410
430 x 71 x 92 mm (With Battery Cartridge BH1220)
413 X 74 X 92 mm (With Battery Cartridge BH1220C)
454 x 71 x 92 mm (With Battery Cartridge BH1233)
421 x 74 x 107 mm (With Battery Cartridge BH1233C)
1.6 kg
D.C. 12 V
Corporation as the
BFL200F
8 - 20 N·m
8 - 18 N·m
9.5 mm
220
ENH101-15
responsible