Threading The Machine Head; Standard Threading For The Machine With Automatic Thread Trimmer - JUKI MF-7200D series Betriebsanleitung

%. THREADING THE MACHINE HEAD
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and ascertaining that the motor is at rest. If threading is wrong,
stitch skipping, thread breakage, needle breakage or irregular stitches will be caused. So, be careful.
1. Standard threading for the machine with automatic thread trimmer
Thread the machne head accordng to the followng threadng llustratons.
* For the adjustment procedure other than the above, refer to the Instruction Manual for MF-7200D.
1
* Thread as shown with dotted line A when using
highly elastic thread.
* Thread as shown with dotted line A in the case
the looper thread slips off the looper thread
clamp of the thread trimmer.
1
A
– 11 –
2
2