Silvercrest SSMW 750 D1 Bedienungs- Und Sicherheitshinweise Seite 11

Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product's rating label .
Regularly check the power plug
and the power cord for damages .
If the power cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard .
Protect the power cord against
damages . Do not let it hang over
sharp edges, do not squeeze or
bend it . Keep the power cord
away from hot surfaces and open
flames .
Operation
The product must not be left
unattended while it is connected
to the supply mains .
Do not move the product while it
is in operation .
Do not use the product without an
inserted set of plates .
Do not place the product on hot
plates (gas, electric, coal cooking
range etc .) . Operate the product
on a level, stable, clean, heat-
resistant and dry surface .
Do not cover the product while it
is in use or shortly after use, when
it is still hot .
Make sure that the power cord
is not pinched by the plates or
touches the rim of the plates .
The use of extension cords is not
recommended .
If the use of an extension cord is
necessary, it must be designed for
a current flow of at least 10 A .
Lay cords in such a way that
they may not be tripped over or
otherwise damaged .
The product is not intended to
be operated by means of an
external timer or separate remote-
control system .
GB/CY 9