Crushing Hazard; Explosion Hazard - Parkside PDSS 400 A1 Bedienungs- Und Sicherheitshinweise

Safety instructions for air tools
The hazards listed are foreseea-
ble for general use of handheld
air impact drivers. However, the
user must also assess specific
risks which may arise from its
use.
DANGER! Keep your
„ „
hands or other limbs out
of reach of rotating
parts. Injuries may other-
wise occur.
„ „

CRUSHING HAZARD!

Keep hands away from the
counter bearing (e.g. box
spanner) during use. This par-
ticularly applies when remov-
ing screws in tight work envi-
ronments.
„ „
RISK OF INJURY! Discon-
nect the compressed air before
changing tools, adjustments
and maintenance.
„ „

EXPLOSION HAZARD!

Never use petrol or other flam-
mable liquids to clean the air
tool! Sparks could ignite resid-
ual vapours inside the com-
pressed air tool resulting in
explosion. Do not use the tool
in explosive environments with
flammable liquids, gasses or
dust. Never work on materials
8 GB
which are or potentially could
be highly flamable or explo-
sive.
In the cases of multiple haz-
„ „
ards the safety instructions
must be read and understood
before attaching, operating,
repairing and exchanging ac-
cessories and before working
near the ma-chine for screw
connections. Otherwise severe
bodily injuries may result.
The machine for screw con-
„ „
nections should only be set up,
adjusted or used by qualified
and trained operators.
Never modify the machine for
„ „
screw connections. Modifica-
tions may reduce the effective-
ness of safety measures and
increase operator risks.
Do not lose the safety instruc-
„ „
tions – hand them to the oper-
ator.
Never use a damaged ma-
„ „
chine on screw connections.
Regularly maintain machines
„ „
to verify all required rated
values and markings such as
rated speed or rated air pres-
sure are legible on the ma-
chine. If necessary, the user
must contact the manufacturer
for replacement labels for
markings.
Only use the equipment for
„ „