Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following in-
structions for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
Scope of Delivery
1 x Wicker Sunlounger
2 x Wheels
Assembly material:
2 x Screws (1)
2 x Cover caps (2)
1 x Allen key (3)
2 x Washers (4)
2 x Guide bearings (5)
1 x Instructions for use
Intended Use
This article is not intended for commercial use.
The article is designed for use in the private
living area, e.g. balcony, terrace or garden.
Symbols used
Date of manufacture (month/year):
01/2019
Safety Instructions
Risk of Death!
• Never leave children with the packaging ma-
terial without supervision. Risk of suffocation.
Risk of Injury!
• Ensure that the rod (figure D) clicks into place
when you open the article!
• Ensure the correct stability has been achieved
before using the article.
• Place the article on a level surface.
• Take particular care not to trap your fingers
when opening and closing the article. There is
a risk of injury by crushing.
• Ensure that the folding function is correctly
locked before using the article.
• Ensure that the article has been fully opened
before using the article.
• The article may only be used with adult super-
vision and may not be used as a toy.
• The article may only be used by one person
at a time.
• Check the article for damage or wear before
each use.
• Do not use the back or armrests as a seat.
• Do not use the article in the vicinity of an open
flame.
Avoid damage to property!
• Secure the article during extreme weather
conditions, e.g. in strong winds. Store the
article in a sheltered room.
Mounting the wheels (Fig. B)
Attach the wheels as shown in figure B.
1. Place the washers (4) on the screws (1).
2. Push the guide bearings (5) and the screws
with the washers into the wheels and tighten
the screws using the Allen key (3).
Note: If the screws are fastened too tightly the
wheels may become blocked and the screws
can break off. The screws should be in place
securely but the wheels still must be able to turn.
3. Attach the cover caps (2) on the centre of the
wheels to cover the screws.
Cleaning and Care
Always store the product in clean and dry con-
dition at room temperature. Only use water to
clean and wipe it dry with cleaning cloth.
IMPORTANT! Never clean the product with
aggressive cleaning agents.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the packa-
ging materials out of the reach of children.
GB
13
Werbung
Inhaltsverzeichnis
