Dry Ironing - Grundig SI 3350 Handbuch

OPERATION _________________________________
Preparation
1 Remove all packaging materials, labels and
protective foil and dispose of them according
to the applicable legal regulations.
2
Clean the outer parts of the appliance as de-
scribed in the section "Cleaning and care".
3 Place the appliance on an even, stable, dry
and non-slip surface.
Notes
During the first use, a light odour may arise
7
from the iron. This ceases after a couple of
uses.
The "CLICK" sound you hear during ironing,
7
is because of the anti-drip feature of your ap-
pliance. This is a normal sound.
In order to generate steam, the soleplate
7
of your iron has to rise to a certain level of
temperature. By means of the "anti-drip" fea-
ture of your iron, water dripping from the sole-
plate of the iron shall be prevented until
D
the soleplate attains the temperature required
Your product is intended for use with tap
7
water. If your tap water is excessively limy, we
recommend to use a mixture of tap water with
purified water. Prior to ironing for the first time
fill twice and vaporize. Meanwhile, use the
steam burst frequently. In this way, both the
H
steam performance will improve and also the
dust particles which might have penetrated
through the steam channels will be cleaned
up.
If water runs out during ironing, you can top
7
up water without waiting the appliance to
cool down. But do not forget to unplug it be-
fore topping up.
When spray does not squirt water, in order
7
to eliminate any possible blocking, close the
spray hole with your finger and press on the
spray button several times.
Caution
22 ENGLISH
When your iron is filled with excessive water,
7
it may overflow. To avoid this, when you hold
your iron horizontally, make sure that the level
of water in the appliance does not exceed
the MAX. line. Alternatively, filling the empty
water tank do not fill more than three pouring
cups filled to the MAX level.
K

Dry ironing

1 Set the steam setting knob
tion.
Caution
Always read the care label on your garment
7
before setting the temperature.
2 Set the required ironing temperature. Do not
press the steam burst button during dry iron-
ing.
D
3
After ironing let the appliance cool down in a
location that is safely out of reach of children.
Filling in the water tank
1
Always unplug the appliance. Set the steam
setting knob to "0" position.
2
Open the water refill lid
the pouring cup
to the MAX level. Do not fill the water tank
beyond the MAX indication.
3
Close the water refill lid
Note
Even when ironing garments without steam;
7
water should be available in the appliance in
order to use the water spray
Do not fill the water tank with perfume, vin-
7
egar, laundry starch, lime removers or other
products or chemicals which shall facilitate the
ironing process.
If your tap water is excessively limy, we recom-
7
mend to use a mixture of tap water with puri-
fied water.
to the "0" posi-
I
on the iron. Use
E
to fill the water tank up
K
.
F
.
E