Main Controls - Braglia 200.302.77 Handbuch Für Installation, Gebrauch Und Wartung

5 – MAIN CONTROLS
Lavoro
Sensori
Opzioni
Cisterna
200.1012.15
2000
litri
MENU'
5.1 - TURNING ON
Hold down for 3 seconds.
5.2 - TURNING OFF
Hold down for 3 sec.
5.3 - DISPLAYED DATA
Press or to scroll through available data.
Data displayed is pre-established and depends on the version and type
of sensors connected.
Available data display is listed in paragraph 10.
As far as data calculated by the device is concerned (time, litres, dis-
tance and area), the displayed value can be put in stand-by condition.
Hold down for 3 seconds until you hear the first beep. The value will
start flashing to indicate that it is stand-by condition.
Hold down for 5 seconds (second beep). The partial counter of the
data displayed will be reset. In this mode, there is no need to open the
resetting menu.
5.4 - SETTINGS
To open the Settings menu, hold
To move the selection bar:
To confirm your selection:
To quit: + .
To modify a number within the selected menu, hold
Press to change the setting more rapidly.
5 / 22
+ down together for 2 seconds.
or .
.
down.
Rev. 01 01/02/2016