Braun Oral-B SMART Serie Bedienungsanleitung Seite 16

Important Information
• Your Oral-B toothbrush can be used with
your smartphone (find details under
«Connecting your toothbrush to your
Smartphone»).
• To avoid electromagnetic interference
and/or compatibility conflicts, deactivate
the radio transmission of your toothbrush
handle (5) before using it in restricted
surroundings, such as aircrafts or
specially marked areas in hospitals.
• Deactivate radio transmission by simul-
taneously pressing the on/off (3) and
mode button (4) for 2 seconds until the
radio transmission display (7) goes off.
Follow the same procedure to reactivate
transmission again.
• Persons with pacemakers should always
keep the toothbrush more than six inches
(15 centimeters) from the pacemaker
while turned on. Anytime you suspect
interference is taking place, deactivate
the radio transmission of your handle.
Description
1 Brush head
2 Smart Ring
3 On/off button
4 Brushing mode button
5 Handle
6 Brushing mode display
7 Radio transmission display (with
Bluetooth
8 Charge level display
9 Charger
Accessories (depending on model):
10 Brush head holder
11 Brush head compartment with protec-
tive cover
12 Smartphone holder (stand)
13 Beauty bag
14 Travel case
15 Charger pouch
Note: Content may vary based on the model
purchased.
91617762_D700_WE.indd 17 91617762_D700_WE.indd 17
Business Use - P&G AUTHORIZED 91830781 Rev 001 Effective Date 2018-02-21 Printed 2019-01-23 Page 17 of 108
wireless technology)
®
Specifications
For voltage specifications refer to the bot-
tom of the charging unit.
Noise level: 68 dB (A)
Charging and Operating
Your toothbrush has a waterproof handle, is
electrically safe and designed for use in the
bathroom.
• You may use your toothbrush right away
or charge it briefly by placing it on the
plugged-in charger (9).
Note: In case the battery is empty (no
lights illuminated on charge level display
(8) while charging or no reaction when
pressing the on/off button (3)), charge at
least for 30 minutes.
• The charge level is indicated on the
charge level display (8). Flashing lights
indicate that the battery is charging (pic-
ture ); once it is fully charged, the lights
1
turn off. A full charge typically takes
12 hours and enables at least 2 weeks of
regular brushing (twice a day, 2 minutes).
Note: At a very low charge level, the lights
might not flash immediately; it can take up
to 30 minutes.
• If the battery is running low, a red light is
flashing on the charge level display and
the motor is reducing its speed. Once the
battery is empty, the motor will stop; it will
need at least a 30-minute charge for one
usage.
• You can always store the handle on the
plugged-in charging unit to maintain it at
full power; a battery overcharge is pre-
vented by device.
Note: Store handle at room temperature
for optimal battery maintenance.
Caution: Do not expose handle to tem-
peratures higher than 50 °C.
Using your toothbrush
Brushing technique
Wet brush head and apply any kind of tooth-
paste. To avoid splashing, guide the brush
head to your teeth before switching on the
handle (picture ). When brushing your
2
17
19.02.18 10:58 19.02.18 10:58