Starting The Appliance - Amibot Spirit LASER Bedienungsanleitung

EN
Operating the appliance
Inserting the H2O tank
With the H2O tank, the robot can vacuum and mop floors in one go.
Clip the 2-in-1 H2O tank to the back of the robot. The robot
automatically detects this tank with its sensors (see composition
of the product page 7). The robot is ready to start vacuuming and
mopping.
When the robot is turned on for its cleaning cycle, the vacuum
suction starts and the automatic pump in the H2O tank is activated
to clean hard floors.
NOTES:
• It is possible to adjust the intensity of the flow of water from the H2O tank.
From the settings, select the desired intensity of flow in the "Washing control"
option. Do not use the 2-in-1 H2O tank to clean rugs or carpets.
• Please remove the 2-in-1 H2O tank from the robot before charging.

Starting the appliance

All of the functions below can only be accessed from the AMIBOT
mobile app.
After having attached the Dust bin, press the robot's AUTO button,
or press "Start" on the app. The robot starts its cleaning cycle in
AUTO Mode.
16