Risks; Electrical Components; Hazardous Dust; Spare Parts And Accessories - Makita VC4210L Originalbetriebsanleitung

2

Risks

2.1

Electrical components

DANGER
The upper section of the machine con-
tains live components.
Contact with live components leads to seri-
ous or even fatal injuries.
1. Never spray water on to the upper sec-
tion of the machine.
DANGER
Electric shock due to faulty mains con-
necting lead.
Touching a faulty mains connecting lead
can result in serious or even fatal injuries.
1. Do not damage the mains power lead
(e.g. by driving over it, pulling or crush-
ing it).
2. Regularly check whether the power cord
is damaged or shows signs of ageing.
3. If the electric cable is damaged, it must
be replaced by an authorized Makita
distributor or similar qualified person in
order to avoid a hazard.
4. In no circumstances should the power
supply cord be wrapped around fingers
or any part of the operators person.
2.2

Hazardous dust

WARNING
Hazardous materials.
Vacuuming up hazardous materials
can lead to serious or even fatal injuries.
1. The following materials must not be
picked up by the machine:
– hot materials (burning cigarettes, hot
ash, etc.)
– flammable, explosive, aggressive
liquids (e.g. petrol, solvents, acids,
alkalis, etc.)
– flammable, explosive dust (e.g. mag-
nesium or aluminium dust, etc.)
*) Optional accessories / Option depending on model
Original instruction
2.3

Spare parts and accessories

CAUTION
Spare parts and accessories.
The use of non-genuine spare parts, brushes
and accessories can impair the safety and or func-
tion of the appliance.
1. Only use original spare parts and accessories
from Makita. Spare parts that can affect health
and safety of the operator and or function of the
appliance, are specified below:
Description
Flat filter PTFE, 1 pcs.
Fleece filter bag, 5 pcs.
Disposal bag, 5 pcs.
Motor cooling air filter PET, 1 pcs.
2.4

In explosive or inflammable atmosphere

CAUTION
This machine is not suitable for use in explo-
sive or inflammable atmospheres or where
such atmospheres are likely to be produced by the
presence of volatile liquid or inflammable gas or va-
pour.
3

Control / Operation

CAUTION
Damage due to unsuitable mains voltage.
The appliance can be damaged as a result of
being connected to an unsuitable mains voltage.
1. Ensure that the voltage shown on the rating plate
corresponds to the voltage of the local mains
power supply.
3.1

Starting and operating of the machine

1. Check that the electrical switch is switched off
(in position 0).
2. Check that suitable filters are installed in the
machine.
3. Connect the suction hose into the suction inlet at
the machine by pushing the hose forward until it
fits firmly in place at the inlet.
4. Connect the tubes with the hose handle, twist
the tubes in order to ensure that they are prop-
erly fitted.
D
Makita VC4210L
GB
F
NL
I
N
S
DK
Order No.
W107418351
SF
W107418353
E
W107418355
P
W107418352
GR
TR
SLO
HR
SK
CZ
PL
H
RO
BG
RUS
EST
LV
LT
AL
MK
SR
UK
13