User Config 2/2 Menu; Troubleshooting - Sony LMD-650 Gebrauchsanweisung

The USER CONFIG Menu

USER CONFIG 2/2 Menu

USER CONFIG 2/2
H SHIFT
V SHIFT
POWER SAVING
FACTORY PRESET
OPERATION TIME
000000H
H SHIFT
Adjusts the position of the picture. As the setting
increases, the picture moves to the right, and as the
setting decreases, the picture moves to the left.
V SHIFT
Adjusts the position of the picture. As the setting
increases, the picture moves up, and as the setting
decreases, the picture moves down.
POWER SAVING
When set to on, the monitor goes into power saving
mode if no signal is input. You can select the period
before the monitor goes into power saving mode from
among OFF, 15 or 60 seconds.
FACTORY PRESET
The user controls are reset to the factory preset
settings.
12
(GB)
VIDEO
50
50
OFF

Troubleshooting

This section may help you isolate the cause of a
problem and as a result, eliminate the need to contact
technical support.
•The display is colored in green or purple t Select
the correct input.
•The black bars appear at the upper and lower
positions of the picture t When the signal aspect is
different from that of the LCD panel, the black bars
appear. This is not a failure of the unit.
•The unit cannot be operated t The key inhibit
function works.
Set the 6-pin of the REMOTE connector to OFF.