Color Temp Menu; User Preset Menu; User Config (1/2, 2/2) Menu - Sony Trinitron PVM-14L2MD Gebrauchsanweisung

COLOR TEMP menu

The COLOR TEMP menu is used for adjusting the
picture white balance.
You need to use a measurement instrument to adjust the
white balance.
Submenu
COLOR TEMP

USER PRESET menu

The USER PRESET menu is used for adjusting the
picture.
Items that cannot be adjusted depending on the input
signal are displayed in blue.
Submenu
PRESET
28
Adjustment Using the Menus
Setting
Select the color temperature from
among D65, D56, D93 and USER
setting. Selecting a color
temperature with USER allows
adjustment of the color
temperature. (Adjustment of the
color temperature requires the use
of measurement instrument.)
Notes
• A color temperature set with
USER can be set to any color
temperature within a range of
5000K to 10000K.
• A setting of D65 is appropriate
when using the monitor with an
endoscope.
• A setting of D56 is appropriate
when using the monitor with a
biological microscope.
• Adjustment of a setting made
with USER can be done on the
USER COLOR TEMP menu of
the USER SERVICE menu.
For further details, see USER
SERVICE menu on page 29.
Setting
When this is set to ON, all of the
controls on the control panel are
disabled (the REMOTE indicator
lights), and the preset values in the
monitor's internal memory (the
factory settings) are activated.
Submenu Setting
ADJUST... • CONTRAST...: Adjusts the
• BRIGHT...: Adjusts the picture
• CHROMA...: Adjusts the color
• PHASE...: Adjusts color tones.
• APERTURE...: Adjusts the
• VOLUME...: Adjusts the audio

USER CONFIG (1/2, 2/2) menu

The USER CONFIG menu is used to select a language for
the menus and the on-screen messages or to determine the
type of video signal acceptable on the RGB/
COMPONENT connectors.
Submenu Setting
RGB SYSTEM (1/2) When a signal input via the RGB/
COMPONENT connector is being
monitored, based on the signal
being input, select RGB/INT, RGB/
EXT, COMP/INT, or COMP/EXT.
OPT RGB SYST (1/2) The display differs depending on
the option board installed. For
further details, refer to the option
settings.
LANGUAGE (2/2) The language to be used for display
of menu items and messages can be
selected from among the following
seven options.
[
[ENGLISH]: English
[DEUTSCH]: German
[FRANÇAIS]: French
[ITALIANO]: Italian
[ESPAÑOL]: Spanish
[
AUTO CHROMA/ Adjusts color intensity (CHROMA)
PHASE (2/2) and color tones (PHASE).
• ON: When set to ON,
• OFF: When set to OFF,
picture contrast.
brightness.
intensity. The higher the setting,
the greater the intensity.
The lower the setting, the lower
the intensity.
The higher the setting, the more
greenish the picture becomes.
The lower the setting, the more
purplish the picture becomes.
picture sharpness. The higher
the setting, the sharper the
picture.
level.
]: Chinese
]: Japanese
CHROMA and PHASE are set
to automatic adjustment values.
CHROMA and PHASE are set
to the factory settings.