Specifications; Ec Declaration Of Conformity; Specific Safety Rules - Makita BPB180 Bedienungsanleitung

ENGLISH
1-1. Battery cartridge
1-2. Button
1-3. Red part
2-1. Lock-off button
2-2. Switch trigger
3-1. Speed adjusting dial
4-1. Lamp
5-1. Tighten
5-2. Loosen
5-3. Protrusion

SPECIFICATIONS

Max. cutting capacity
Blade size
Overall dimensions (L x W x H)
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
Intended use
The tool is intended for cutting in wood, plastic and
ferrous materials.
For European countries only
Noise and Vibration
The typical A-weighted sound pressure level is 77 dB (A).
Uncertainty is 3 dB(A).
The noise level under working may exceed 85 dB (A).
Wear ear protection.
The typical weighted root mean square acceleration
value is not more than 2.5 m/s
These values have been obtained according to
EN60745.
For Model BPB180
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that this
product is in compliance with the following standards of
standardized documents;
EN60745, EN55014
Directives, 89/336/EEC, 98/37/EC.
Yasuhiko Kanzaki CE2006
Explanation of general view
5-4. Lever
6-1. Blade
6-2. Bearing
6-3. Upper holder
6-4. Lower holder
7-1. Upper holder
7-2. Lower holder
7-3. Wheel
7-4. Press
8-1. Screw
Model
Round workpiece
Rectangular workpiece
Blade speed
Length
Width
Thickness
Net weight
Rated voltage
2
.
in accordance with Council
ENE009-1
000087
ENG003-2
MAKITA INTERNATIONAL EUROPE LTD.
Michigan Drive, Tongwell, Milton Keynes, Bucks MK15
8JD, ENGLAND
Responsible manufacturer:
Makita Corporation Anjo Aichi Japan

SPECIFIC SAFETY RULES

DO NOT let comfort or familiarity with product
(gained from repeated use) replace strict adherence
to portable band saw safety rules. If you use this tool
unsafely or incorrectly, you can suffer serious
personal injury.
ENH102-5
1. Use only blades which are 1,140 mm long, 13
mm wide, and 0.5 mm thick.
2. Check the blade carefully for cracks or
damage before operation. Replace cracked or
damaged blade immediately.
3. Secure the workpiece firmly. When cutting a
bundle of workpieces, be sure that all
workpieces are secured together firmly before
cutting.
4. Cutting workpieces covered with oil can cause
the blade to come off unexpectedly. Wipe off
3
8-2. Stopper plate
8-3. Blade
12-1. Cutting wax
13-1. Wheel
13-2. Tire
13-3. Lip
14-1. Limit mark
15-1. Screwdriver
15-2. Brush holder cap
BPB180
120 mm dia.
120 mm x 120 mm
1.4 - 2.7 m/s
1,140 mm
13 mm
0.5 mm
523 mm x 231 mm x 313 mm
6.4 kg
D.C. 18 V
Director
GEB005-3