Led Indicators - Axis Q1615-E Mk II Installationsanleitung

* The serial number may be required during installation.
1
Cable gland
2
Gasket
3
Cable hole
4
Cable gland
5
Network cable (route through wall bracket)
6
Bottom cover
7
Bottom cover screws (4x)
8
Wall mount
9
Bracket adjustment screw

LED Indicators

Note
• The Status LED can be configured to be unlit during normal operation. To configure, go
to Setup > System Options > Ports & Devices > LED. See the online help for more
information.
AXIS Q1615-E Mk II Network Camera
11