Using Colour Temp; Using Cti; Using Colour Management - Pioneer PDP-436RXE Bedienungsanleitung

Basic Adjustment Settings

Using Colour Temp

1
Press HOME MENU.
2
then ENTER).
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
Select "Colour Temp" ( /
6
Select the desired parameter ( /
• If you have selected a desired parameter in this step,
skip steps 7 and 8.
• You may rather want to perform fine adjustment. To do
this, select "Manual" first and then press and hold
ENTER for more than three seconds. The manual
adjustment screen appears. Then go to step 7.
Colour Temp
Adjusts the colour temperature, resulting in a better white balance.
Selections High White with bluish tone
Mid-High Intermediate tone between High and Mid
Mid Natural tone
Mid-Low Intermediate tone between Mid and Low
Low White with reddish tone
Manual Colour temperature adjusted to your
preference
7
Select an item to be adjusted ( /
8
Select the desired level ( / ).
Item
button
R High
Fine adjustment For weaker red
for bright
G High For weaker green
portions
B High For weaker blue
R Low
Fine adjustment For weaker red
for dark
G Low For weaker green
portions
B Low For weaker blue
• To perform adjustment for another item, press
RETURN, and then repeat steps 7 and 8.
• You may press / to immediately change an item to
be adjusted.
9
Press HOME MENU to exit the menu.

Using CTI

1
Press HOME MENU.
2
then ENTER).
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
then ENTER).
Select "CTI" ( /
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
button
For stronger red
For stronger green
For stronger blue
For stronger red
For stronger green
For stronger blue
then ENTER).
then ENTER).
6
Select the desired parameter ( /
CTI
Provides images with clearer colour contours. The CTI stands for Colour
Transient Improvement.
Selections Off Deactivates the CTI.
On Activates the CTI.
7
Press HOME MENU to exit the menu.

Using Colour Management

1
Press HOME MENU.
2
then ENTER).
Select "Picture" ( /
3
Select "Pro Adjust" ( /
4
Select "Colour Detail" ( /
5
Select "Colour Management" ( /
6
Select an item to be adjusted ( /
Colour Management
R
Y
G
C
B
M
7
Select the desired level ( / ).
Item
button
R
Closer to magenta
Y
Closer to red
G Closer to yellow
C Closer to green
B
Closer to cyan
M Closer to blue
• To perform adjustment for another item, press
RETURN, and then repeat steps 6 and 7.
• You may press / to immediately change an item to
be adjusted.
8
Press HOME MENU to exit the menu.
then ENTER).
then ENTER).
then ENTER).
then ENTER).
then ENTER).
0
0
0
0
0
0
button
Closer to yellow
Closer to green
Closer to cyan
Closer to blue
Closer to magenta
Closer to red
08
29
En