Cleaning - Silvercrest SSMS 600 D3 Bedienungsanleitung

Cleaning

WARNING - RISK OF ELECTRIC SHOCK!
► Before you start to clean the hand blender, ALWAYS unplug the appliance
from the mains power socket .
►
it in water or holding it under running water .
WARNING - RISK OF PHYSICAL INJURY!
► To avoid injuries, exercise caution when handling the extremely sharp
blade 7 . Reassemble the liquidiser after use and cleaning to prevent injury
from the exposed blade . Keep the blade out of the reach of children .
NOTICE
WARNING - PROPERTY DAMAGE!
► Do not use aggressive, chemical or abrasive cleaning agents! They could
irreparably damage the upper surfaces!
1) Disconnect the power cable .
2) Clean the motor block 4 and the whisk holder 9 with a moist cloth .
Ensure that water cannot permeate through the openings on the motor block 4 .
For stubborn stains, put some mild detergent on the cloth . Wipe detergent
residues off with a damp cloth .
3) Clean the blender 5, the bowl lid 6, the bowl 8, the whisk 0, the
measuring beaker q and the blade 7 thoroughly in washing-up water and
then remove the detergent residues by rinsing them with clean water .
4) Dry everything well with a dish towel and ensure that the appliance is com-
pletely dry before re-use .
■ 32 │ GB │ IE
Under no circumstances may the motor unit 4 be cleaned by immersing
The measuring beaker with combined lid/base q, whisk 0, bowl
with combined lid/base 8 and blade 7 are dishwasher-safe .
SSMS 600 D3