Operation - Silvercrest SSMS 600 D3 Bedienungsanleitung

Operation

WARNING! RISK OF INJURY!
► Foodstuffs should not be too hot . Squirting contents may cause scalding .
NOTICE
► When you beat cream with the whisk 0 hold the container at a slant
during the beating . In this way the cream will be thicker quicker . Ensure
that cream cannot be sprayed out of the container while it is being beaten .
When whipping cream, slide the speed regulator 1 to position "5" .
When you have assembled the blender set as you wish to use it:
1) Insert the plug into a mains power socket .
2) Press and hold the switch 2 to process foodstuffs at the standard speed .
Slide the speed regulator 1 in the direction of "5" to increase the speed .
Slide the speed regulator 1 in the direction of "1" to reduce the speed .
3) Press and hold the turbo-switch 3 to process foodstuffs at a higher speed .
By pressing the turbo-switch 3 the maximum processing speed is available
immediately .
4) When you have completed the processing of the foodstuffs, simply release
the switch .
NOTICE
► Should unusual noises be heard during operation, such as squeaks or similar,
lubricate the drive shaft of the blender with a few drops of neutral cooking oil:
■ 30 │ GB │ IE SSMS 600 D3