Sk 2 Bodypack Transmitter - Sennheiser freePORT Bedienungsanleitung

freeport.book Seite 20 Mittwoch, 18. Mai 2005 8:35 08

SK 2 bodypack transmitter

Operating controls
³ ON/OFF
button
·
Operation and battery status indication, red LED
»
Microphone/instrument input,
3.5 mm jack socket (lockable)
¿
Antenna (can be screwed off)
´
Battery compartment cover
·
20
Inserting/replacing the battery
We recommend powering the bodypack transmitter by a 9 V PP3
alkaline battery (IEC 6 LR 61). If powered by a rechargeable 9 V battery,
the operating time will be drastically reduced.
Open the battery compartment by first sliding the battery
compartment cover in the direction of the arrow. Then flip the
battery compartment cover open.
Insert the battery as shown. Please observe correct polarity when
inserting the battery.
Close the battery compartment.
Note:
·
When the red LED
the battery as soon as possible.
² MIC/INST
slide switch
¶
Serial number
º
Channel selector switch
¾
Sensitivity control
µ
Type plate
¸
Belt clip
goes off during operation, you must replace
CH (1 to 4)
GAIN