Product Safety Information; Product Specifications; Torque Adjustment - Ingersoll-Rand QS110P4 Technische Produktdaten

Product Safety Information

Intended Use:
These tools are designed to remove and install threaded fasteners.
For additional information refer to Air Pulse Tool Product Safety Information Manual
Form 04584983.
Manuals can be downloaded from www.ingersollrandproducts.com

Product Specifications

Model Style
QS110P4 Pistol Square
QS120P4 Pistol Square
QS140P4 Pistol Square
QS150P6 Pistol Square
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
Installation and Lubrication
Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585747 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
After each 150,000 cycles, or as experience indicates, drain and refill the Impulse Unit Drive
Assembly using the Fluid Replacement Kit (Part No. EQ106S-K400). Lubricate the hex drive and
the output shaft before assembly.

Torque Adjustment

See drawing 47132956 on Page 2.
To adjust the torque on these Twin Blade Impulse Wrenches, proceed as follows:
1. Remove the Socket Plug.
2. Rotate the Drive Shaft until the Torque Adjustment Screw is visible in the opening.
3. Using a 1.5 mm hex wrench, rotate the Torque Adjustment Screw clockwise to increase
torque. To decrease torque, rotate the Torque Adjustment Screw counterclockwise.
4. Replace the Socket Plug.
Make all final adjustments at the job.
47156203_ed3
Free
Drive
Speed
Type Size rpm
1/2" 5800
1/2" 5400
1/2" 5200
3/4" 4400
Sound Level dB(A)
(ISO15744)
† Pressure (L ) ‡ Power (L
p
85.8
83.2
85.3
87.8
*K = Vibration measurement uncertainty
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease
NOTICE
EN
Vibration (m/s²)
(ISO28927)
) Level
w
96.8 3.3
94.2 3.2
96.3 6.8
98.8 4.4
*K
0.7
0.7
1.4
1.5
EN-1