Description; Technical Data - SKF TMJL 50 Bedienungsanleitung

1. Description

The TMJL 50 has a maximum pressure of 50 MPa (7 250 psi) and delivers a volume per
stroke of 3,5 cm (0.21 in
3
It is mainly intended for use on the low pressure side of OK-couplings but is also suitable
for other oil injection applications where a maximum pressure of 50 MPa (7 250 psi)
is required. The pump is supplied with a 3 metre long, high pressure hose with quick
connection coupling. Mating quick connection nipple for attachment to the workpiece
is included.
The pump is filled with SKF mounting fluid LHMF 300 and comes with an additional
1 litre can with the same fluid. Everything is packed in a sturdy case.
The pump has an over-pressure valve and a connection port for pressure gauge.
The release valve is an integrated part of the pump head.

2. Technical data

Maximum pressure
Volume per stroke
Oil container capacity
Handle force at 50 MPa
Pressure hose
Connection nipple
Oil viscosity of mounting fluid
Weight (filled with oil)
Designation
SKF TMJL 50
).
3
50 MPa (7 250 psi)
3,5 cm
3
2 700 cm
310 N (70 lbf ft)
3 m (10 ft) long with quick connection coupling
G 1/4, external or internal thread
300 mm
12 kg (26 lb)
TMJL 50
(0,21 in )
3
(165 in )
3 3
/s (1 400 SUS) at 20 °C
2
5