Switch Off The Product; Frost Protection Function; Use The Heating Fan Only; Care And Cleaning - Silvercrest SOR 2400 D2 Bedienungs- Und Sicherheitshinweise

Press the heating fan switch
"I" to switch on the heating fan . An indicator
in the heating fan switch
Hot air will be blown through the hot air
outlet .
5
To switch off the hot air outlet
heating fan switch
Using the temperature control
product to the desired temperature .
˜ Switch off the product
Press the heating fan switch
to switch off the hot air outlet
Turn the temperature control
the heat level switch
Remove the mains plug from the mains
socket .
˜ Frost protection function
The frost protection function
automatically controls the product to
keep the room temperature above
7 °C, steps are as follows:
Connect the product to an earthed mains
socket protected by a residual current circuit
breaker .
Switch on the product by setting the heat
level switch
2
by setting the temperature control
"MIN" . The product switches on when the
room temperature is approx . 7 °C . As soon
as the room temperature is above 7 °C, the
product automatically switches off again .
Note: The product will switch itself on and
off automatically to maintain a temperature
higher than 7 °C .
12 GB
321301_SI_CZ_SK_02.indb 12
to position
4
will light up .
4
, press the
5
to "0" position .
4
to set the
3
to position "0"
4
.
5
to MIN and
3
to "0" .
2
to either "1", "2" or "3" and
to
3
˜ Use the heating fan only
To use the hot air outlet
product, steps are as follows.
Connect the product to an earthed mains
socket protected by a residual current circuit
breaker .
Press the heating fan switch
"I" to switch on the hot air outlet
indicator in the heating fan switch
light up . Hot air will be blown through the hot
air outlet .
5
To switch off the hot air outlet
heating fan switch
4
˜ Care and cleaning
WARNING!
Let the product to cool down
before cleaning .
WARNING!
Never immerse the product,
power cord or mains plug into water .
Remove the mains plug from the mains socket
and leave the product to cool completely
before cleaning .
Use a damp lint-free cloth to clean the
product . Use a mild detergent on the cloth
for stubborn dirt .
Do not use abrasive, aggressive or chemical
cleaning agents . It could damage the surfaces
of the product .
˜ Storage
If the product not to be use for a long period
of time, clean it as described in the section

"Care and cleaning" .

only on the
5
to position
4
. An
5
will
4
, press the
5
to "0" position .
17/5/2019 3:40 PM