G) Display And Reset Min./Max. Values; Snooze Mode; I) Background Light - Eurochron EFUS 750 Bedienungsanleitung

g) Display and reset Min./Max. values

If you use multiple outdoor sensors, the values of all channels are reset.
• In normal display mode, briefly press the button ALARM (5). The indicator MAX appears on the display.
• Press the button HISTORY/- again, to display the maximum values for precipitation (1h, 24h, Week, Month) and air
pressure (absolute, relative).
• Optional: To reset the maximum values for precipitation, wind, air pressure, temperature and humidity, keep the
button SET depressed for approx. 3 seconds. The indicator CLR flashes briefly on the display.
• Press the button ALARM. The indicator MIN. Appears on the display.
• Press the button HISTORY/- again, to display the minimum values for air pressure (absolute, relative).
• Optional: To reset the minimum values for air pressure, temperature and humidity, keep the button SET depressed
for approx. 3 seconds. The indicator CLR flashes briefly on the display.
• Press the button SNOOZE / LIGHT, to call up the normal display mode.
h) Snooze mode
• As soon as the waking signal sounds, press the button SNOOZE / LIGHT. The Alarm symbol flashes and the signal
sounds again after 5 minutes.
• Press any other button to abort the snooze mode.

i) Background light

• Briefly press the button SNOOZE / LIGHT, to activate the background light for 5 seconds.
• Keep the button SNOOZE / LIGHT depressed for 2 seconds, to switch the background light on permanently. The
indicator LED ON briefly appears on the display.
• If the background light is switched on permanently, briefly press the button SNOOZE / LIGHT, to alter the brightness.
You can switch between Level 1 and the level previously set.
• If the background light is switched on permanently, press the button SNOOZE / LIGHT two times quickly in
succession (double click), to call up the setting mode for the background light.
Set the required level with the buttons HISTORY/- or CHANNEL/+. To confirm, press the button SET.
• To switch the background light off again, keep the button SNOOZE / LIGHT depressed for 2 seconds. The indicator
LED OFF briefly appears on the display.
60