• You can mount the assembly foot on a mast. To do this use the 4 large bolts with nuts and the fixing plate.
Alternatively you can mount the assembly foot directly on a wall with the 4 screws.
c) Rain sensor
• For the horizontal alignment there is a small spirit level on the top side. Install the rain sensor, so that the small air
bubble in the spirit level is situated in the middle of the circular marking.
• You can mount the rain sensor on a mast. To do this, use the two U-shaped bolts with 2 nuts on each. Then replace
the collection container (16) and turn it in a clockwise direction.
54