Vertical / Horizontal Airflow Direction Control (Optional); Auto Restart Function - LG Multi Benutzerhandbuch

Vertical / Horizontal Airflow Direction Control (Optional)

The up/down airflow (Vertical airflow) can be
adjusted by using the remote controller.
1. Press the ON/OFF BUTTON to start the unit.
2. Press CHAOS SWING BUTTON.
3. The louvers will swing up &
down automatically.
4. To stop the louver at a desired
angle, press again
NOTE
• By pressing the CHAOS SWING BUTTON the horizontal air flow direction is changed automatically based on the chaos
algorithm to distribute the air in the room evenly and at the same time to make the human body feel most comfortable as if
enjoying natural breeze.
• Manually moving the vertical air flow direction louver by hand could damage the mechanism.When the unit is shut off, the
up/down airflow direction louver will close the air outlet vent of the system.
• The Chaos Swing may not run correctly during sleep mode.
Because Horizontal Airflow Direction Control is optional function, some product will not operate.

Auto Restart Function

This function is useful in the situation of power failure.
When power regains after a failure this feature restore the previous operating condition
and the air conditioner will run in the same settings.
NOTE
This feature is enabled by factory default setting, but you can disable it by pressing the
ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4
times.
To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator
lamp(1) will blink 4 times.
The left/right(Horizontal airflow) can be adjusted
by using the remote control.
1. Press the ON/OFF BUTTON to start the unit.
2. Press the HORIZONTAL AIRFLOW
DIRECTION BUTTON.
3. The louvers will swing left &
right automatically.
4. To stop the louvers at a desired
angle, press again.
Operating Instructions
Owner's Manual 15