Changing A Parameter; Exiting The Program Mode; Cleaning; Frequency Of Cleaning - LAVAZZA BLUE LB2200 Installations- Und Bedienungsanleitung

10.6

Changing a parameter

All editable parameters can be very easily changed.
When the page containing the value you wish to change is displayed, press "Enter".
2.1.2
Std temperature
100
Warning! When you change a machine operating parameter, you
should be aware that you are changing an operating parameter
set by the manufacturer for the purpose of ensuring optimal machine
performance.
The value will become editable and the " " symbol will appear beneath the digit
to be changed.
2.1.2
Std temperature
100
Press the up/down keys to change the value.
When the desired value is displayed, press "ENTER" to confirm.
The value will be memorised and the next digit will become available for editing.
2.1.2
Std temperature
100
When the desired value is displayed, press "ENTER".
The value will be memorised and the next digit will become available for editing.
2.1.2
Std temperature
100
When the desired value is displayed, press "ENTER".
The " " symbol will disappear and the settings will take effect only when you
exit the program mode.
10.7

Exiting the program mode

To quit the program mode, the following page must be displayed.
When the message appears on the display, press "ENTER".
0
Exit
Enter to quit
• 28 •
11

CLEANING

All the operations described in section 11 must be performed
exclusively by your service provider or a specialised technician,
who must organise all the operating sequences and use suitable
means to ensure strict compliance with current safety regulations.
Warning. Before undertaking any maintenance and/or cleaning jobs,
switch off the machine, unplug it and wait for it to cool down.
To ensure that the machine delivers optimal performance and dispenses drinks
of the best quality, carefully abide by the instructions contained herein.
Unless otherwise specified, non-removable components and the
machine itself should be cleaned only with cold or lukewarm water
using non-abrasive sponges and damp cloths (do not attempt to clean
exposed electrical parts in this manner).
• Do not use any detergent or solvent which could impair the machine's form
or functionality.
• Do not immerse the machine in water or other liquids: this will damage the
machine.
• Do not wash any of the machine components in a dishwasher.
• Always dry machine components by hand, without placing them in a con-
ventional or microwave oven.
• Do not spray water directly onto the machine.
• All the parts requiring cleaning are easily accessible so no tools are
needed.
• Regular maintenance and cleaning will preserve the machine and keep it
performing efficiently for a longer time as well as ensuring compliance with
basic standards of hygiene.
Important. The machine should undergo maintenance at the fre-
quencies shown in the routine maintenance table in section 11.1
of this instruction book.
11.1

Frequency of cleaning

To ensure that the appliance performs efficiently, it is recommended to carry out
the cleaning and maintenance operations described in the table below.
Operation to be perfor- When
med signalled
Empty out clean the dreg
drawer.
Clean the pod loading
slide.
Clean the water tank.
Steam wand
11.2

Cleaning the water tank

The water tank must be cleaned every time it is to be refilled.
At every After
refill 2 refill