Plantronics Discovery 925 Erste Schritte Seite 4

2 Pairing Your Earpiece
1. Turn on the Bluetooth feature on your phone. For most
phones, select Settings/Tools > Connections > Bluetooth
> On. See your phone's user guide for more information.
2. Turn the earpiece on. Press and hold the call control button
until the indicator flashes red/blue. The earpiece is now in
pairing mode.
3. Use the commands on your phone to locate your earpiece.
For most phones, select Settings/Tools > Connections >
Bluetooth > Search > 9XXPlantronics. See your phone's
user guide for more information.
4. When prompted for the PIN code or Passkey, enter 0000.
Pairing is successful when the indicator on your earpiece flashes
blue. Your earpiece is now connected and ready to use.
3 Adjusting the Fit
For optimal voice clarity, point the boom towards the corner of your
mouth. The earpiece comes with the medium eartip installed, but
you can replace it with the optional small or large eartip provided.
1. Rotate the eartip on the earpiece to position the stabilizer
to rest comfortably in your ear. If the earpiece still feels
unstable, then change the eartip to a different size.
2. To remove the eartip, gently pull the stabilizer loop of eartip off
of the speaker housing.
3. To fit a new eartip, position the eartip over the speaker housing
with the stabilizer pointed away from the microphone boom and
gently press onto speaker housing.
4 Earpiece Controls
Turn on the earpiece Press and hold the call control button for 2 seconds until
the indicator glows blue. If earpiece flashes red 3 times
when you turn on the earpiece then the battery is very
low and should be recharged.
NOTE When your earpiece is in standby mode, the
indicator is off. To confirm that your earpiece is on, press
any button. You should see a blue light flash.
Turn off the earpiece Press and hold the call control button for 4 seconds until
the indicator glows red.
Answer or reject a call When your earpiece rings, tap the call control button
once. To reject a call and send the caller to voice mail,
press the call control button for 2 seconds.
End a call During active call, tap the call control button
Make a call When the earpiece is paired to your phone and in range,
enter phone number on your phone and press send.
Adjust the volume During an active call, tap the volume button. Each tap
will increase the volume until maximum is reached and
you hear two low tones. Tapping again will drop volume
to minimum setting.
WARNING Do not use headphones/earpieces at high volumes for
an extended period of time. Doing so can cause hearing loss. Always
listen at moderate levels. See www.plantronics.com/healthandsafety
for more information on earpieces and hearing.
TIP If you need assistance pairing your device, please visit
www.plantronics.com/support
VISIT www.plantronics.com/documentation for a complete user guide
and learn how to take advantage of advanced features.